? ? Satellite Finder Analog

wiring and operation:

1.Connect a jump from LNB to satellite finders “TO LNB” input.
2. Connect te “TO REC” a DC 13~18V power which comes from satellite receiver.
3. Make sure that satellite Finder is properly connected.Plug in the AC cord and turn on the satellite receiver.There will have light on the scale, the reading shall be around 1.
4.Make coarse dish alignment by setting Azimuth and inclination.
5.Set the reading around 5 by adjusting satellite Finder’s level control on front.
6.Adjust dish position feedhorn position,and polarization to have the highest reading on the tinder.If full scale,low down the reading by turning level control counterclockwise.
7.Remove the jump cable satellite Finder.Resume connection of satellite receiver and LNB.