S11 Convoy Xhp70.2 Xhp70.3 HI LED ,26650 Flashlight ,Torch,With 26650 Battery Inside

Specifiions
Modes: 12groupsReflector: / aluminum alloy
LED:CREE XHP70.2 / XHP70.3 HI R70 / XHP70.3 HI R9050LED
Driver:max output 5amsp, Temperature protection management inside
Switch type: reverse switch
Lens: ar-coated double sidesBattery:1pcs 26650 included.Diameter: 33mmLength: 139mmWeight: 171g
Driver (12groups):
max current output is 5000mA
I biggest advantage is that no frequency can be seen in any mode, and there is temperature management.
It can control the flashlighttemperature not to exceed 55 degrees Celsius,
If the flashlight temperature is below 55 degrees Celsius, it will output full current. If it is above 55 degrees Celsius, it will constantly adjust the current so that the flashlight will not overheat
12 groups:
1.cli the switch to turn the flashlight on/off,tap the switch to select mode
2.if flashlight is turnedon,tap the switch 20 times qui lyto enter into config mode.(On a visual interface,as long as you cli on an option, it means that the option is selected. The flashlight has no visual interface. It flashes to represent an option, and “tap the switch in the flashing process” means to select the option.)
Option 1(normal-flash 1 time+ buzz-flash):tap the switch to enter into sub-option to select the mode group,If the user has no , the config mode will enter option 2.
————-sub-option 1.1 (normal-flash1 time) : tap the switch to select mode group 1 (0.1%, 1%, 10%, 35%, 100%, strobe, biking, battery-che )
————-sub-option 1.2 (normal-flash2 times) : tap the switch to select mode group2 (0.1%, 1%, 10%, 35%, 100%)
————-sub-option 1.3 (normal-flash3 times) : tap the switch to select mode group3 (100%, 35%, 10%, 1%, 0.1%)
————-sub-option 1.4 (normal-flash4 times) : tap the switch to select mode group4 (1%, 20%, 100%, strobe, biking, battery-che , SOS)
————-sub-option 1.5 (normal-flash5 times) : tap the switch to select mode group5 (1%, 20%, 100%)
————-sub-option 1.6 (normal-flash6 times) : tap the switch to select mode group6 (100%, 20%, 1%)
————-sub-option 1.7 (normal-flash7 times) : tap the switch to select mode group7 (0.1%, 1%, 10%, 50%, strobe, biking, battery-che , SOS)
————-sub-option 1.8 (normal-flash8 times) : tap the switch to select mode group 8(0.1%, 1%, 10%, 50%)
————-sub-option 1.9 (normal-flash9 times) : tap the switch to select mode group9 (50%, 10%, 1%, 0.1%)
————-sub-option 1.10 (normal-flash10 times) : tap the switch to select mode group10 (1%, 10%, 35%, 100%)
————-sub-option 1.11 (normal-flash11 times) : tap the switch to select mode group11 (100%, 20%, strobe)
————-sub-option 1.12 (normal-flash12 times) : tap the switch to select mode group 12(100% only)
Option2(normal-flash 2 times+ buzz-flash):tap the switch to active the mode or inactive it,If the user has no ,flashlight will enterinto the last mode.
battery-che instructions:
2.95V 1 flash,
2.95-3.25V 2 flashes,
3.25-3.55V 3 flashes,
3.55-3.85V 4 flashes,
3.8