HackRF One (1MHz-6GHz) 10DBM Software Radio SDR Communication Experiment Platform

Specification:
Item Type: Software Defined Platform
Net Weight: 60 g
Product Size: Approx. 118 x 75 x 11mm / 4.6 x 3 x 0.4in
For HackRF One hardware is mainly composed of the following parts:
RFFC5072: The mixer provides a local oscillator from 80MHz to 4200MHz
MAX2837: 2.3GHz to 2.7GHz Broadband RF Transceiver
MAXS864: ADC / DAC, 22MHz sampling rate 8bit
LPC4320 / 4330: ARM Cortex M4 processor, clocked at 204MHz
Si5351B: I2C programmable arbitrary CMOS clock generator, providing 40MHz50MHz and sampling clock by 800MHz frequency division
MGA-81563: 0.1-6GHz 3V, 14dBm
SKY13317: 20MHz-6.0 GHz RF single pole three throw SP3T on
SKY13350: 0.01-6.0GHz RF single pole double throw SPDT switch

Taking the receiving process as an example, the process after the signal enters through the antenna is as follows:
1. The RF switch determines whether the is amplified by a 14dB .
2. High-pass or low-pass filtering of the signal through the image suppression filter
3. Signal RFFC5072 chip mixing to 2.6GHz fixed IF
a. The latest firmware supports the option of variable IF
b. IF range 2.150GHz-2.750GHz
4. The signal is sent to the MAX2837 chip and mixed to the baseband to output a differential IQ signal.
a. During the MAX2837 chip can limit the bandwidth of the signal
5. The MAX5864 chip digitizes the baseband signal and sends it to the CPLD and the microcontroller TODO FIXME
6. CPLD
7. LPC4320 / 4330 processor sends sampling data to computer via USB
8. Put the RFFC5072 and MAX2837 in a shield to protect them from external interference and other chips on the board, and try to prevent electrostatic breakdown of some chips

Package List:
1 x Software Defined Platform

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Designed to support testing and development of modern and -generation technologies, it is an open source hardware platform that can be used as a USB peripheral or programmed for independent operation
1MHz to 6 GHz operating frequency
Software-configurable RX and TX gain and baseband filter
Software-controlled antenna port power 50mA at 3.3 V
SMA female clock input and output for synchronization
Half-duplex transceiver; Up to 20 million samples per second
8-bit quadrature samples 8-bit I and 8-bit Q