? ? ? HABOTEST HT208 Digital Clamp Meter 1000V/1000A AC/DC True-RMS NCV Multimeter Clamp Voltage Cu

Specifications:
&&& HT208A / HT208D Commodity Specifications
Brand: HABOTEST
DC Voltage: 600mV/6V/60V/600V/1000V
AC Voltage: 600mV/6V/60V/600V/750V
DC Current: 60A/600A/1000A(HT208A Not Support)/(HT208D Support)
AC Current: 60A/600A/1000A
DCA Zero: (HT208A Not Support) / (HT208D Support)
Resistance: 600?/6k?/60k?/600k?/6M?/60M?
Capacitance: 10nF/100nF/1?F/10?F/100?F/1mF/10mF/100mF
Frequency: 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
Duty: 1%~99%
Temperature(°C/°F): -40°C~1000°C(-40°F~1832°F)
Counts: 6000 Counts
Auto/Manual Range:Support
Continuity: YES
Diode: YES
Data Hold: YES
NCV: YES
Auto Power Off: YES
True RMS: YES
VFD: YES
Inrush: YES
Back Light: YES
Flashlight: YES
Low Battery Indication: YES
3×1.5V AAA batteries: (NOT Included)
Maximum/minimum value measurement: YES
Relative value measurement: YES
Low impedance input: YES
VA—LED: YES
Safety Rating: EN61010-1,-2-030; EN61010-2-033; EN61326-1 CAT III 1000V, CAT IV 600V
Package List:1 * Digital Clamp Meter ,1 * Thermocouple ,2 * Test Lead, 1 * User Manual(English)

1.This is a dual impedance true RMS digital multimeter integrating a variety of measurements like AC/DC , AC/DC current, frequency, duty ratio, resistance, capacitance, temperature, diode, continuity, NCV, VFD, inrush current, etc.. And there are more ftions like last data hold, flashlight, Max./Min./Relative value, Celsius/Fahrenheit degree, and zero key.
Features:
2.CLAMP MULTIMETER: Measures inrush current, VFD current/, AC/DC current, AC/DC , frequency, duty ratio, resistance, continuity, diode, capacitance, temperature, non-contact AC (NCV) detection, and live detection.
3.WIDE OPENING JAW: Opening jaw capacity is 40mm, wide enough to measure without disturbing the circuit.
4.LOUD BEEP: NCV sensor send out audible and visual alarm once received electromagnetic signal.
5.MORE FTIONS: Features data hold, flashlight, low display, Celsius/Fahrenheit degree, Max./Min./Relative value, and Zero(reset) key.
6.SAFE TO USE: Designed and conforms to IEC61010-1, CAT III 1000V, safe and reliable.
7.AUTO-OFF: Auto power off within 15 minutes if there is no operation, helps conserve the .
8.MULTI TESTER: Comes with 2 test leads and a thermocouple to be used as a multitester.