?Anti-roll 3D contact probe edge finder+CNC 4-axis MACH3 breakout board kit Probe edge finder to D?

packing list
USB Type C connector*1
mach3 board *1
The DIYO three-coordinate probe can realize the functions of fast positioning, edge finding, center finding, shape measurement and so on by connecting the CNC to the knife edge, which greatly solves the trouble of positioning the workpiece during the second clamping during the machining process.
Working voltage: 5-24V wide voltage
Indicator light: green light when power on, red light after trigger
The shell is made of fine frosted black oxidized aluminum alloy, flat anti-roll design, and the stylus handle is machined in stainless steel
Adapt to various control boards/boxes such as grbl control board and Mach3
The core chip is a military-grade component, which is extremely anti-interference. Suitable for harsh electromagnetic interference environments such as plasma cutting machines, electric welders, and industrial CNC milling machines. It can operate stably in a strong electromagnetic interference environment for a long time.
It is suitable for driving control of various stepping motors and servo motors.
Similarities and differences with industrial-grade USB interface control card:
1 The transmission distance is farther than the USB interface control card, which can be remotely controlled via the network
2 An external 5V power supply is required, and the wiring is not as convenient as a USB control card
The anti-jamming capabilities of the two cards are the same. Which one to buy, please weigh according to actual needs
parameter:
Pulse rate: up to 200K (each axis)
Number of axes: 4 axes (XYZ axis and one rotation axis)
Digital input/output: 8/4
Handwheel interface: support
Inverter interface: support
Power supply: 5VDC
Power consumption: less than 4W
Applicable software: Mach3
Data interface: Ethernet
Precautions:
1.Need to turn on the spindle speed?Never, never, never.Don’t laugh, there are such users. 2.How to distinguish the three wires?The red wire is VCC, the black wire is GND, and the white wire is IO. 3.Why is the concentricity different every time the probe is installed?Because your ER chuck spring clip cannot guarantee 100% uprightness. Every time the probe is installed, even if the concentricity is adjusted to 1 wire, there will still be deviations when the probe is removed and installed again. So your chuck is best to buy AAA and above accuracy (concentricity <=0.005), because many chucks in China have false standards, it is recommended to use a high-precision gauge or tungsten steel rod to check the table after installing the chuck. Look at concentricity. It’s best to place the dial indicator at a distance of 50mm from the chuck, which is roughly the distance between the ball head of our probe and the root of the tool handle. 4.Why am I obviously an AAA chuck, and the concentricity is still poor?That's because you bought a virtual label chuck.Under normal circumstances, if the spindle jumps by 0.01, the AAA chuck clamps the milling cutter and the table tool holder, the error may not