?60m 195ft Waterproof Underwater Diving Housing Case for Nikon D500 + 105mm F/2.8G IF-ED Lens ?k

start
end
Specification:
Lens mold polishing proceeding.Images transfer mirrired LCD view panel.Polycarbonate housing carries the camera to the depth to 40M.O-ring gaskets seal operates housing 100% waterproof guntion.Durable Hi-Imapct ABS “Z-LOCK” latch system with safery lock,easy to open.Use buttons are labelled on housing, same like working on the camera itself.Neck strip,hand stirp, waterproof seal, silicone grease for the waterproof seal attached in every poece of camera housing.
Suitable for:
NIK0N D500 Camera
105mm F/2.8G IF-ED Lens
Include:
1 X Waterproof Housing
1 X Waterpoof gasket
1 X Neck strip
1 X Hand strip
1 X Silicone Grease
1 X User manual
Checking before Using:
Check if the water proof camera housing in good condition everytime before using it, make sure there is no sand or dust.
After coating waterproof oil, fill-up all tissues inside the case, and then close the case, put the case to at least 200MM depth of water and keep for at least 5 minutes, make sure there is no water get in.
After above two steps checking, you can put your camera in and use it freely now.
Maintenance after using:
Using fresh water to wash the inside of the case, do not use water tempreture higher than 40 celsius degree, otherwise will hurt the waterproof case
If use it in deep sea area, do wash it much longer time, suggest put it in fresh water for several hours
Make sure all the waterproof case inside the fresh water, including the safety lock of the waterproof case
After wash it cearly, use soft cloth to make it dry lightly, and put in the shade ventilated place to dry it
Residual seawater will damage the metal part of the case, it will hurt the button, hinge and lock
Do use clean and soft cloth to clean the inside of the waterproof case
O-seal ring must be washed cleanly after take down, and use the seal bag to keep it safe; or put it on the waterproof case but not lock the case, to keep the o-seal flexible enough; whole box put into seal bag and keep it dry and safe, it will protect the waterproof case and make it work much longer time