?16″ Inch 12V 120W Universal Condensing Fan Slim Push Pull Electric Radiator Cooling Fan Mount ??”

Description:
100% Brand new radiator cooling fan blade for Universal use
12V, 120W
?11 AMP DRAW
10 Blades
Color: Black
Fan Diameter: 16.82″
Fan Thickness: 3.27″
Maximum Fan CFM: 1000 CFM
Maximum Fan RPM: 2000±10% RPM
Easy direct installation, require NO modification
OE Fitment or Replacement, Push or Pull Type
Package Includes:
1 * 16 inch Electric Fan Assembly
(Fitment It’s a universal fit cooling fan.Make sure the fan size is correct with your original .)
Fitment:
Universally fits any vehicle and radiator
Modification (cut) might be required for some vehicles
About this item:
Puller Fans & Pusher Fans:
This fan assembly is designed for both PUSHER and PULLER applications.To change airflow direction from the factory setting,you MUST follow the directions below or performance will be compromised!
HOW TO CHOOSE A ELECTRIC RADIATOR COOLING FAN?
Measure the area with an existing fan, radiator, and shroud removed to find out how much room you have to work with.
About diameter, you should get one/two fan that covers as much of the radiator as possible.
Always keep some clearance between the fan motor and the engine.
Straight blades move more air but make more noise. On the other hand, curved blades are quieter, but not more as much air. Choose according to your needs.
Puller fans provide more cooling capacity than pusher fans.
Always choose puller fans If space is an issue then use a pusher fan.
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on vehicles,Always use eye protection (goggles,safety glasses or shield). Park the vehicle in a well lit area,on level ground and apply the parking brake.Only work on a cold vehicle that has bean sitting overnight, failure to do so will result in severe burns and injury.Before starting the vehicle,make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Product Show:
Take the four mounting feet provided and attach them to the slots on the outside of the fan housing at the desired locations around the perimeter.
Please Note: Tensioner springs included,not pictured) is optional. For use with mounting rods prior to placing through mounting feet. Tensioner Springs not necessary for mounting fan(s)to radiator.
Position the Fan Assembly against the radiator or air conditioning condenser. Take the four Mounting Rods and carefully install them through the Mounting Feet and then though EITHER the radiator or air conditioning condenser.
Take the four 1 x1 Foam Pads and remove the paper backing.Now installation them(sticky side toward the core) onto the Mounting Rods now protruding through the radiator or air conditioning condenser.
Take the four Mounting Clips supplied and install them onto the Mounting Rods.The mounting Clips can only be used one time,so make sure the Fan Assembly is in the correct location.
Secure Mounting Clips until 1×1 Foam Pads are slightly