?TONGOU Type A RCCB RCD 230V 2P 16A 63A 30mA 6KA Electromechanic Residual Current Circuit Break ??

This product has no over-current protection function, please use it with MCB
Tip: Please noted the input MUST from TOP side, or will damage the product.
Tips: 30mA, 100mA, 300mA is electromechanical type, 10mA is electronic type.
The default voltage is 220V~250V. If you need 110V voltage, please contact customer service, item needs to be customized.
General
This isA TypeResidual Current Circuit Breaker
Residual Current Circuit Breaker is applicable to electric circuits with rated voltage 230/400V AC, frequency 50/60Hz and rated current up to 63Amp.
The RCCB provides indirect protection to the operator’s body under such condition that the exposed live parts should be connected to a proper earthing pole.The RCCB also provides protection against the fire danger caused by earth fault current due to function failure of over-current protection device.
Special tips:
1. RCCB with rated sensitivity up to 10mA could be used as supplementary protecting device in case other
protecting device fails its protection against electric shock.
2. RCCB designed for household installation and other similar application, is for non-professional operation,
and no maintenance is required.
3. RCCB provides on protection against electric shock resulted from direct contacts of both protected lines,or
leakage current between these two lines.
4. Particular devices such as surge protective devices,surge arrester etc are recommended to install at upstream line to RCCB as precaution against potential surge voltage and current occurring at its power input side.
5. Satisfying conditions and applications as mentioned above,RCCB with “ON-OFF” indicating device is considered suitable for isolation function.