Material: Nylon

Each box contains:
6.25 wire x1
7u wire x1
2u wire x4
Stems x10
Housings x10
Nut and washer x10
Stabilizer shims

The SWK Knight Stabilizers V2 uses a double-shot silicone molding process through both stem and housing injection molding processes to reduce the rattle noise generated by contact between stem and housing and stem with wire.
It also improves a new mold from V1 to reduce wobble and adjust the base for a clearer sound.
The stem and the end of the wire are adjusted to be rounded. To make the smoother time

This SWK Knight V2 has also claimed that
“No Wire-balancing required!” It can be used immediately without bending the wire. And it is recommended to loop using only 205gd0 due to the high viscosity loop. There is a chance that the sound is easily solidified when used with Knight V2.

* * The * The long-pole will be designed to increase the length at the bottom of the stem to limit the total travel distance, which if using a switch with a low travel at this section will help the keycaps better attach to the stab. And does not leak out while in use (Knight’s long pole body V2 will have a total travel of 3.7mm)