?3pin 5pin XLR Wireless DJ Dmx512 Controller Dmx Moving Head Stage Light Wireless Dmx Transmitte ?9

3pin 5pin XLR Wireless DJ Dmx512 Controller Dmx Moving Head Stage Light Wireless Dmx Transmitter Disco Light Par Light Console
DMX512 wireless transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.No time delay when signal data is transmitting, signal data is real time and reliably.This product adopts a 2.4G ISM frequency section.High effective GFSK modulate,communication design; 126 channels jumping frequency automatically, high anti-jamming ability.126 channels jumping frequency automatically, high anti-jamming ability, to ensure works reliability.7 groups ID code settable,User can use 7 groups individual wireless net without any interfere each other in the same place. ( Tricolor LED displaying Indicators )
Specification:
2.4G wireless DMX512 R/TInput voltage: 5VDC 500mA MINReceive Sensitivity: -94dBmMax transmitting power rate: 20dBmDMX connector: 3pin male or 5pin male Communication distance: 700M ( visible distance )Work frequency section: 2.4G ISM, 126 channels.frequency sectionPlug standard: US / EU /AU/UK ( optional )Material: zinc alloy + plasticItem size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )Package size: 14.5 * 10.5 * 4.5cm/5.7 * 4.13 * 1.77in ( L * W * H )Package weight: 180g / 6.36oz
Operating manual
ID code and LED color corresponding relationship:1: RED2: GREEN3: RED+GREEN4: BLUE5: RED+BLUE6: GREEN+BLUE7: RED+GREEN+BLUE1). Press momentary switch above the side led indicator to indicate ID setting.2). Press again to set IC, to the color ID desired, adding 1 each time you press the switch will advance the color IDcode.3). Working condition:LED constant lit up: No DMX or wireless signal.Red LED flash: Transmitting.Green LED flash: Receiving4) RF frequency 2.400 – 2.525G, total 126 channels, it’s searching automatically.5). ID Code “1-7” groups ID code, press ‘KEY’ for setting, it only can work under same ID code of transmitter and receiver. ( Same LED Color )
Establishing Communication:
1. Power on DMX512 wireless received board first and then following to power up the transmitted board.2. Press “Key” button to set same ID value of transmitted board and received board. Please use different ID value if you need use more than 1 group wireless universals at same time in same place.3. The red LED flashes when transmitter transmits DMX data by no interfered frequency section, then receiver changes communicated frequency section. Green LED flashes until received same ID value, the more DMX data, the faster the LED flashes.4. Communication was established correctly.
Packaged including:
1T = 1pc transmitter +1pc power adapter
Note:
Indoor use only.3 years warranty, repairment, free replacement except damaged artificially.The manufacturer willn’t offer free service in warranty period if any repaired or uncapped had happenedIt’s better to return to manufacturer if repairment is must, don’t do any repairment unless qualified electrician.The working condition should be under